型 號:LES10-R、LES15-R前移式電動堆高車
規 格:1000kg、1500kg前移式電動堆高
公司名稱:諾力頓前移式電動堆高車
保質周期:12
價 格(≤ 1) ¥電議 /臺
優惠價格(≥ 5):電議


1.前移式電動堆高車交流驅動系統使整車反應更迅速,運行更平穩,電瓶使用壽命更長;
2.諾力頓前移式電動堆高車采用創新的驅動浮動系統,實現了高速轉彎時車身平穩、不傾斜;
3.全電動前移式堆垛車使用工業電池,動力強勁,滿足大部分企業的中高頻率貨物搬運要求;
4.諾力頓全電動前移式堆垛車手柄配有紅色緊急斷電開關,遇到危險時按下可以迅速切斷整車電源,車子立即停止,確保安全;
5.重型堆高車PG/CURTIS驅動控制器,具有再生制動、反向制動及多種參數可調功能;
6.諾力頓重型堆高車擁有可折疊式踏板,操作者可根據不同作業工況輕松轉換,輕松進入駕駛狀態;
7.前移式電動堆高車側立式電池放入設計,便于電池的取放;
8.全電動前移式堆垛車可叉取任意托盤,在任意平臺作業,無叉腳障礙,適合狹小空間作業,如:工業電梯、擁擠貨架等;
9.重型堆高車廣泛應用于工廠、車間、倉庫、流通中心和配送中心、港口、碼頭、車站、機場等需要物流的場所,并且可以進入集裝箱、倉庫內進行操作,用于倉庫取貨,堆貨架,物品堆垛.

10.更多電動堆高車型號、種類、性能請進入全電動堆高車頁面.
| 特性Feature | |||
| 型號Modle | 單位 | LES10-R | LES15-R |
| 驅動方式 Type of Moving | 蓄電池 | 蓄電池 | |
| 額定載重 Load Capacity | kg | 1000 | 1500 |
| 載荷中心距 Load center | mm | 500 | 500 |
| 軸距 Wheel base | mm | 1280 | 1380 |
| 操作類型 Operating type | 站架式 | 站架式 | |
| 車輪 Wheel | |||
| 輪子類型(前/后)Wheel type | PU | PU | |
|
驅動輪、平衡輪/承重輪數量 Wheel quantity Driving wheel/Balance wheel/Bearing wheel |
1+2/2 | 1+2/2 | |
| 驅動輪尺寸 Driving wheel size | mm | Φ230×70 | Φ230×70 |
| 承重輪尺寸 Bearing wheel size | mm | Φ210×70 | Φ210×70 |
| 平衡輪尺寸 Balance wheel size | mm | Φ115×55 | Φ115×55 |
| 尺寸 Dimension | |||
| 門架高度 Min.height of the door frame | mm |
1790/2040/ 2190/2040 |
1790/2040/ 2190/2040 |
| 自由提升高度 Free lifting height | mm | - | - |
| 貨叉起升高度 Fork lifting height | mm |
2500/3000/ 3300/4500 |
2500/3000/ 3300/4500 |
|
起升后整車高度(帶擋貨架) The lifting height of the whole (affter tape file shelf) |
mm |
2040/3090/ 3590/5090 |
2040/3090/ 3590/5090 |
| 整車長度 Overall length | mm | 2300 | 2400 |
| 整車寬度 Overall width | mm | 850 | 850 |
| 貨叉外側間距 Overall fork width | mm | 200-680 | 200-680 |
| 貨叉尺寸(厚*寬*長) Fork size(s*e*l) | mm | 30×100×1070 | 30×100×1070 |
| 貨叉高度 Min.foek height | mm | 70 | 70 |
| 離地間隙 Min.ground clearance | mm | 40 | 40 |
|
通道寬度,帶1000×1200mm托盤 Channel width,with 1000×1200mm tray |
mm | 2260 | 2260 |
|
通道寬度,帶800×1200mm托盤 Channel width,with 800×1200mm tray |
mm | 2230 | 2230 |
| 手柄離地高度 Handle height | mm | 1010/1480 | 1010/1480 |
| 回轉半徑 Min.turning radius | mm | 1650 | 1750 |
| 性能 Performance | |||
|
行駛速度,滿載/空載 Travel speed,laden/unladen |
km/h | 5.3/6.0 | 5.3/6.0 |
|
起升速度,滿載/空載 Lift speed,laden/unladen |
mm/s | 75/105 | 75/105 |
|
下降速度,滿載/空載 Lowering speed,laden/unladen |
mm/s | 145/80 | 145/80 |
| 爬坡度,滿載/空載 Gradeability,laden/unladen | % | 5.0/10.0 | 5.0/10.0 |
| 電氣配置 Electrical configuration | |||
| 驅動電機 Drive motor | Kw | 1.50AC | 1.50AC |
| 起升電機 Lift motor | Kw | 2.2DC | 2.2DC |
| 蓄電池電壓/容量 Battery voltage/capacity | V/AH | 24/210(Industry) | 24/270(Industry) |
| 制動 Brake | 再生/電磁制動 | 再生/電磁制動 | |
| 控制器型號 Controller | PG/CURTIS | PG/CURTIS | |
| 重量 Weight | |||
| 自重(含蓄電池)Service weight with battery | kg |
1636/1736/ 1836/1936 |
1636/1736/ 1836/1936 |

注意事項:如在防爆、防水、防腐(化學品、水泥等)及防凍工況場合使用,需另行咨詢,特殊定制.

前移式電動堆高車保質12個月(易損件不保),保質期內出現質量問題免費維修及更換配件,非質量問題收費維修.